| Oracle FAQ | Your Portal to the Oracle Knowledge Grid | |
 |
 | |||
| Oracle FAQ | Your Portal to the Oracle Knowledge Grid | |
|
| |||
Home -> Community -> Usenet -> c.d.o.tools -> Re: Designer Error: "no data found" when creating a new application on a fresh install
Your SQL shows the privileges granted to SYS. You don't want to make SYS your repository owner for Designer. A checklist is below, but make sure the repository has an owner other than SYS.
Van
Oracle Designer/Developer 6.0
At this point I installed Oracle Designer. There are three parts to this.
First install the client software on the P266. Then install the server
software and create a repository database or a repository schema in a
database. Finally configure the init.ora parameters and registry entries if
any changes are necessary. Oracle Designer must install into an Oracle home
named Orant.
C1 At the client go to control panel services and shut down any Oracle
services. In my case none was started. Then put in the Oracle Designer 6.0
CD-ROM and run an install. The name of the Oracle home is DEFAULT_HOME, the
location is ?:\ORANT. I chose a packaged install and selected the following
packages: Analysis, Design and Generation - Generators for Oracle
Developer - Object Extensions. I had to select whether I wanted version 7 or
version 8 of SQL*Plus and Import/Export. I chose version 8. Then the
installer started.
The install completed and I got a message that to have all the functionality
I needed to install report builder 6.0.5.29.2 and form builder 6.0.5.29.4.
These were not on the CD-ROM so I did nothing for the time being. Finally,
I restarted the two services I had stopped and made sure SQL*Plus still
worked and I could connect to my databases.
C2 On the server I changed the init.ora parameter open_cursors = 400. Then
I bounced the database. I
made sure the listener was started. I started SQL*Plus as sys and ran this
script e:\oracle\ora815\rdbms\admin\catexp7. Then I created two
tablespaces, one for tables and one for indexes:
create tablespace DEV60_REPOS_TABLES
datafile 'E:\ORACLE\ORADATA\ORCL\DEV60_REPOS_TABLES01.DBF'
size 100M default storage (initial 128K next 128K pctincrease 0);
create tablespace DEV60_REPOS_INDEXES
datafile 'E:\ORACLE\ORADATA\ORCL\DEV60_REPOS_INDEXES01.DBF'
size 100M default storage (initial 128K next 128K pctincrease 0);
I created one large rollback segment for the install:
create tablespace INSTALL_DEV60
datafile 'E:\ORACLE\ORADATA\ORCL\INSTALL_DEV60.DBF'
size 70M default storage (initial 256K next 256K pctincrease 0);
create rollback segment INSTALL_RBS_DEV60
tablespace INSTALL_DEV60
storage (initial 1M next 1M minextents 3 optimal 4M);
alter rollback segment INSTALL_RBS_DEV60 online;
Then I took the other rollback segments offline:
select segment_name, tablespace_name, status from dba_rollback_segs; alter rollback segment xxx offline; (this turned out to be rollback segments RB0 and RB1)
Then I created a repository owner and granted connect and resource to him
create user DEV60 identified by DEV60
default tablespace DEV60_REPOS_TABLES
temporary tablespace TEMP;
grant connect, resource to DEV60;
C3 Now I moved back to the client and performed the next set of steps.
First I logged onto the server from
the client as sys using the SQL*Plus version 8. I ran
@f:\orant\repadm60\utl\ckrorole. Then I ran the following individual SQL
statements:
grant execute on dbms_lock to DEV60;
grant execute on dbms_pipe to DEV60;
grant select on dba_rollback_segs to DEV60;
grant select on dba_segments to DEV60;
grant create sequence to DEV60;
grant create synonym to DEV60;
grant create table to DEV60;
grant des2000_owner to DEV60;
I modified the DEV60 tnsnames.ora file. I closed SQL*Plus then ran start >
programs > oracle designer r6.0 > repository administration utility. I
connected as DEV60 / DEV60 / ORCL.GLENHILL. At this point I followed the
steps starting on page 2.13 through page 2.29 of the Designer Installation
Guide. These steps check to see whether you have installed the necessary
pieces successfully. I had to modify the registry entries for
EXECUTE_IMPORT, EXECUTE_EXPORT and EXECUTE_PLUS_RAU. After the checks,
while in the Install a Designer/2000 Repository Instance dialog box I
pressed "Start". Many objects were created and actual data was imported
from zipped files. I looked at the log files from the install to see
whether all had gone well.
C4 Finally, there are the post-creation steps. I brought rollback segments
RB0 and RB1 back online. I left the large INSTALL_RBS_DEV60 in place until
I can find out whether it is useful. Then I used the repository
administration utility to view objects and check whether any were disabled,
invalid or missing. None was. I changed the init.ora parameter
max_enabled_roles=50 then bounced the database. I ran two scripts to enable
pinning in the shared pool: @e:\oracle\ora815\rdbms80\admin\dbmspool and
@e:\oracle\ora815\rdbms80\admin\prvtpool.plb. Then I granted access to
DEV60:
grant execute on sys.dbms_shared_pool to DEV60;
I restarted the designer repository administration utility and checked that
pinning worked by pressing the little pin symbol. All went OK. Finally,
following the instructions on page 2.27 of the Designer installation manual
I created a test application system.
C5 During the install of Oracle Designer, several pieces of Oracle Developer
are installed. But not enough. If you try to do something as simple as
running the Designer tutorial you will not be able to until you install
Developer. Installing Developer is a two part process. First you install
whatever pieces you don't already have from the Developer 6.0 CD-ROM. Then
you install patches from the Developer 6.0 Patch 1 set CD-ROM.
These are the pieces I installed from the Developer 6.0 CD-ROM
JDK Applet Viewer 1.1.7.11o
Oracle Developer Demos, Addons 6.0.5.1.3
Oracle Developer Forms 6.0.5.0.2
Oracle Developer Procedure Builder 6.0.5.0.0
Oracle Developer Project Builder 6.0.5.7.0
Oracle Developer Schema Builder 6.0.5.6.0
Oracle Developer Trans Builder 6.0.3.0.3
Oracle Developer Reports Express Support 6.0.5.11.0
Oracle Express Connection Editor 6.2.0.0.1
Oracle Developer Database Tables 6.0.2.0.0h
Oracle Developer Graphics Graphics Builder 6.0.5.8.0
Oracle Developer Graphics Cue Card Sound 6.0.5.6.0
Oracle Developer Reports Builder 6.0.5.28.0
Oracle Developer Reports Cue Card Sound Files 6.0.5.6.0 (this failed)
These are the pieces I installed from the Developer 6.0 patchset 1 CD-ROM
GUI Common Files 6.0.5.29.0
JDK Applet Viewer 1.1.7.15o
Oracle Developer Database Tables 6.0.5.29.0
Oracle Developer Forms 6.0.5.29.4 (but not the web cartridge)
Oracle Developer Graphics 6.0.5.29.1 (but not graphics server)
Oracle Developer Procedure Builder 6.0.5.29.0
Oracle Developer Reports 6.0.5.29.2 (but not multitier server and not thin
client)
Oracle Jinitiator 1.1.7.15.1o
Require Support Files 8.0.5.1.0c
Tools Utilities 6.0.5.29.2
<pete_karanikas_at_hotmail.com> wrote in message
news:8tv0h0$nni$1_at_nnrp1.deja.com...
> Need some Designer help. I have an Oracle 8.1.6 instance on the same
> WinNT box with a fresh install of Designer 6.0.3.1.0. When I try to
> create my first test application as the repository owner, I get the
> following error:
>
> RME-00011: Operation 'INS' on ci_application_systems has failed
> RME-02124: Failed to execute SQL statement: begin
> :errcnt := rmmes.getsize;
rmmes.getall(:errutil,:errcode,
 |
 |