Home » Developer & Programmer » Forms » How ot call a canvas froma form? (Forms 10g)
How ot call a canvas froma form? [message #425921] Tue, 13 October 2009 02:20 Go to next message
monikabhakuni
Messages: 110
Registered: September 2008
Location: India
Senior Member
Hi All,

My requirement is that i need to call a canvas on the click of a button but dont know how to call it?
Can anybody guide me on this?
While the canvas is called it should be in the query mode
and while calling it i should be able to pass an item_id or item_name to that canvas.

Any quick reply will be highly appreciated.

Best Regards,
Monika

Report message to a moderator

Re: How ot call a canvas froma form? [message #425924 is a reply to message #425921] Tue, 13 October 2009 02:46 Go to previous messageGo to next message
Littlefoot
Messages: 21823
Registered: June 2005
Location: Croatia, Europe
Senior Member
Account Moderator
You can not "call" a canvas; but you can navigate to an item that is placed on that canvas.

As you've mentioned a button, perhaps you might do that as following:
-- WHEN-BUTTON-PRESSED trigger:
go_block('some_block_name');
enter_query;
It would navigate to a desired block (if there is at least one navigable item in that block) and enter query mode.

Or, if you want to use "item_id" (how do you get that value? Global variable? Parameter?), you can set block's DEFAULT_WHERE property and immediately execute query. Something like
go_block('some_block_name');
set_block_property('some_block_name', default_where, 'item_id = ' || :global.item_id);
execute_query;

Report message to a moderator

Re: How ot call a canvas froma form? [message #425929 is a reply to message #425924] Tue, 13 October 2009 03:53 Go to previous messageGo to next message
monikabhakuni
Messages: 110
Registered: September 2008
Location: India
Senior Member
HI Littlefoot,

Thanks a lot for your reply.But my requirement is that currenlty i have a form in that form there ia table type structure where we hve fields suppose the value in fields are rowwise for column full_name is A,B,C.
So the requirement is thatwhen i go to A i.e. my cursor is on A
And there is a button to be created which when pressed should direct me to the other canvas where we have details of A.
So can you gudie me how to proceed with that.

Best Regards,
Monika

Report message to a moderator

Re: How ot call a canvas froma form? [message #426061 is a reply to message #425929] Wed, 14 October 2009 00:47 Go to previous messageGo to next message
Littlefoot
Messages: 21823
Registered: June 2005
Location: Croatia, Europe
Senior Member
Account Moderator
As I've already said: you have to go there, so - use GO_ITEM or GO_BLOCK.

Report message to a moderator

Re: How ot call a canvas froma form? [message #426069 is a reply to message #426061] Wed, 14 October 2009 00:52 Go to previous messageGo to next message
monikabhakuni
Messages: 110
Registered: September 2008
Location: India
Senior Member
that is nt a problem... i m getting the item_id and name. the problem is with navigation to that canvas and witht eh triggers to be implemented.

Best Regards,
Monika

Report message to a moderator

Re: How ot call a canvas froma form? [message #426070 is a reply to message #426069] Wed, 14 October 2009 00:56 Go to previous messageGo to next message
Littlefoot
Messages: 21823
Registered: June 2005
Location: Croatia, Europe
Senior Member
Account Moderator
I'm sorry, but it seems that I don't understand the question. If you know item's name, you have already created a button, then the trigger is WHEN-BUTTON-PRESSED and the code is
go_item('item_name');
Am I missing something obvious here?

Report message to a moderator

Re: How ot call a canvas froma form? [message #426077 is a reply to message #426069] Wed, 14 October 2009 01:07 Go to previous messageGo to next message
beginnerHere
Messages: 55
Registered: October 2009
Member
you have to GO to the block where the details for "A" are placed

like if you have a block for the items A, B and C then you have to place the details for those items in another block. Create the block in the same form, place those details then through the wizards and all... and call (from the button) the other block

the best way to do this is

-place the item names and itemID in one table and create the master block.

-then create a separate table for the item details, in it create the itemID column the same as that for the first table

-create another block (detail block) for them

-create the join condition by de-selecting the Auto Join check box, remember to select itemID from both the tables for the join condition

-then in the layout wizard select a new canvas and choose its type as stacked

-DON'T put the itemID for the second block IF you don't want it to display in the other block

-then place a button on the first canvas and for it's When-Button_Pressed trigger place this:
go_block('SECOND_BLOCK_NAME');
show_view('SECOND_CANVAS_NAME');


execute query and hopefully it will work
[EDITED by LF: fixed [code] tags]

[Updated on: Thu, 15 October 2009 00:56] by Moderator

Report message to a moderator

Re: How ot call a canvas froma form? [message #426079 is a reply to message #426077] Wed, 14 October 2009 01:10 Go to previous messageGo to next message
beginnerHere
Messages: 55
Registered: October 2009
Member
sorry DON'T put the <code> and </code> tags in the code

Report message to a moderator

Re: How ot call a canvas froma form? [message #426096 is a reply to message #426079] Wed, 14 October 2009 01:55 Go to previous messageGo to next message
monikabhakuni
Messages: 110
Registered: September 2008
Location: India
Senior Member
HI BegginerHere,

Thanks for your reply.
What i was doing there was creating a data block and a canvas and from the previous canvas i am calling this canvas.
This thing is getting complied but duirng run time i am getting the error message.
FRM-40735: ON-ERROR trigger raised unhandled exception ORA-06508.

So can you please guide me on this thing.

Thanks in Advance.
Monika

Report message to a moderator

Re: How ot call a canvas froma form? [message #426204 is a reply to message #426096] Wed, 14 October 2009 06:54 Go to previous messageGo to next message
beginnerHere
Messages: 55
Registered: October 2009
Member
hey monika,

thank me ONLY IF and WHEN i give you a solution Smile

the best thing to do is what i told you before, create two data blocks for two tables.

if that isn't possible then call the other canvas from the button using:

-show_view('canvas_name');

and on the other canvas put a button that would call the first canvas using the same function of you could hide the second canvas using: hide_canvas('canvas_name');

i will look into it further, i was actually doing the same thing today. so for ease i opted to create two data blocks and two canvases and join them using the join condition.

Report message to a moderator

Re: How ot call a canvas froma form? [message #426205 is a reply to message #426204] Wed, 14 October 2009 06:56 Go to previous messageGo to next message
beginnerHere
Messages: 55
Registered: October 2009
Member
hide_CANVAS('canvas_name');

oh sorry, it is

HIDE_VIEW('canvas_name');

Report message to a moderator

Re: How ot call a canvas froma form? [message #426316 is a reply to message #426205] Wed, 14 October 2009 22:40 Go to previous messageGo to next message
beginnerHere
Messages: 55
Registered: October 2009
Member
hey monika,

did you resolve your issue?

tell me, is the pl/sql that you are writing in a library (.pll)? is the library and the form in the same directory?

there could be two things wrong here...

-either the directory path is getting messed up, for this you'll have to tell me the path of your pll directory

-or the program may have been dropped or incompatibly modified, or have compiled with errors (an attempt was made to call a stored program that could not be found)... for the later check that all referenced programs, including their package bodies, exist and are compatible.

hope this somehow solves your problem!

Report message to a moderator

Re: How ot call a canvas froma form? [message #426496 is a reply to message #426316] Thu, 15 October 2009 23:51 Go to previous messageGo to next message
monikabhakuni
Messages: 110
Registered: September 2008
Location: India
Senior Member
Hi BeginnerHere,

Actually what i was doing is that i am creating one custom table and i m creating a data block using that custom table. Using that data block i am creating a canvas. This canvas which i have created that i am calling from another canvas using a push button in WHEN BUTTON TREGGER .
So the current problem that i was facing was that during run time i was getting the error. FRM-40735 I was runnning this form on my system.

So can you help me with this.

Thanks in Advance,
Monika

Report message to a moderator

Re: How ot call a canvas froma form? [message #426500 is a reply to message #426496] Fri, 16 October 2009 00:41 Go to previous messageGo to next message
Littlefoot
Messages: 21823
Registered: June 2005
Location: Croatia, Europe
Senior Member
Account Moderator
Oracle
ORA-06508: PL/SQL: could not find program unit being called

Cause: An attempt was made to call a stored program that could not be found. The program may have been dropped or incompatibly modified, or have compiled with errors.

Action: Check that all referenced programs, including their package bodies, exist and are compatible.

So, don't call a non-existent program unit. Either declare it or make sure you have required grants to view (and use) it.

For additional help, I guess that you should share code you've put into the WHEN-BUTTON-PRESSED trigger.

Report message to a moderator

Re: How ot call a canvas froma form? [message #426506 is a reply to message #426500] Fri, 16 October 2009 01:09 Go to previous messageGo to next message
monikabhakuni
Messages: 110
Registered: September 2008
Location: India
Senior Member
Hi Littlefoot,

Thanks for your reply. I also know the problem is that it is not able to find a program unit but i am not able to identfy for which program unit form is looking for. As in WHEN BUTTON PRESSED trigger i hve given only view_canvas Command. So dont know why i am getting this problem.I am not able to attach my form with this message as the size of my form is greater than the maximum file size allowed.

Thanks in advance,
Monika

Report message to a moderator

Re: How ot call a canvas froma form? [message #426520 is a reply to message #426506] Fri, 16 October 2009 04:02 Go to previous messageGo to next message
beginnerHere
Messages: 55
Registered: October 2009
Member
you have to check the error message that is causing this.

please press SHIFT-F1 to see the last error message, it will tell you the real problem.

try redesigning the form, maybe that will help... make a dummy form and put only the view_canvas functionality in it and see if it works

as far as your logic of the form goes, i don't think there is anything wrong in the logic. has to be some program unit that accidentally got created or something. or any variable that is getting screwed up

Report message to a moderator

Re: How ot call a canvas froma form? [message #426828 is a reply to message #426520] Tue, 20 October 2009 00:46 Go to previous messageGo to next message
monikabhakuni
Messages: 110
Registered: September 2008
Location: India
Senior Member
Hi,

My form has compiled succesfully it was an apps form so i have compiled it using the command
frmcmp_batch module=$AU_TOP/forms/US/PERWSGEB.fmb userid=apps/apps output_file=$PER_TOP/forms/US/PERWSGEB.fmx
it has to be put ih per respnosibilty.
but now the issue is that after successful comipation also i am not able to see teh changes in fornt end.
Can anybody guide me on this.

Thanks in advance.

Best Regards,
Monika

Report message to a moderator

Re: How ot call a canvas froma form? [message #426840 is a reply to message #426828] Tue, 20 October 2009 01:34 Go to previous messageGo to next message
Littlefoot
Messages: 21823
Registered: June 2005
Location: Croatia, Europe
Senior Member
Account Moderator
monikabhakuni wrote on Tue, 20 October 2009 07:46

but now the issue is that after successful comipation also i am not able to see teh changes in fornt end.

Did you put the new, compiled form into an appropriate directory? Perhaps you are still opening the old FMX.

Report message to a moderator

Re: How ot call a canvas froma form? [message #426843 is a reply to message #426840] Tue, 20 October 2009 01:39 Go to previous messageGo to next message
monikabhakuni
Messages: 110
Registered: September 2008
Location: India
Senior Member
I think that is new fmx.
as from winscp when i am checking i m able to see the new fmx.
is thr any other way to chk it..

If it is then please let me know.

Thanks in advance.

Best Regards,
Monika

Report message to a moderator

Re: How ot call a canvas froma form? [message #426940 is a reply to message #426843] Tue, 20 October 2009 06:42 Go to previous messageGo to next message
monikabhakuni
Messages: 110
Registered: September 2008
Location: India
Senior Member
Hi All,
Now it is working fine but there is one more isseu.
As now i am using go_block to call the canvas. So what is happening right now is that it is navigating ot the desired canvas but in front end i am not able to close that canvas and neither i ma able to save the data from teh canvas to teh datbase.

can somebody guide me on this.

Thanks in Advance.

Best Regards,
Monika

Report message to a moderator

Re: How ot call a canvas froma form? [message #426968 is a reply to message #425921] Tue, 20 October 2009 07:35 Go to previous messageGo to next message
cookiemonster
Messages: 13963
Registered: September 2008
Location: Rainy Manchester
Senior Member
How are you trying to close the canvas at the moment?
How are you trying to save the data?
Are you getting any error messages?

[Updated on: Tue, 20 October 2009 07:36]

Report message to a moderator

Re: How ot call a canvas froma form? [message #427072 is a reply to message #426940] Tue, 20 October 2009 22:45 Go to previous messageGo to next message
beginnerHere
Messages: 55
Registered: October 2009
Member
hey monika,

firstly, if you already haven't, then put an 'exit' button to exit... (exit_form;) ... makes it look better...

secondly, when in the second canvas create a button that calls back the first canvas the same way you did to get to the second canvas.

create a save button with functionality (myself i'm trying to figure that out). you'll find help for that in help index of forms.

Report message to a moderator

Re: How ot call a canvas froma form? [message #427075 is a reply to message #427072] Tue, 20 October 2009 23:24 Go to previous messageGo to next message
monikabhakuni
Messages: 110
Registered: September 2008
Location: India
Senior Member
Hi Cookiemonster,

In every window on the the right top most corner we have a (x) sign to close the window usin that only i am trying to close the window but it is getting hanged.
using hte save button i was tring to save data but it is nt saving.
and i am nt getting any error message.
I thought that template will take care of it
so can you now guide me that why it is behaving like that.
Thanks in Adnvace.
Monika

-----------------------------------------------------------------

Hi BeginnerHere,

My requirement is that i need that particualr window to be closed once the data is being saved bt it is nt behaing in the desired mannner.
I am not creating any button in the second canvas to call back to the first canvas. I want if i close the window of second canvas it should get closed and automatically first canvas wold be thr as it was already oepnd and from that canvas only i am calling the second canvas.

Thanks in Advance.
Monika

Report message to a moderator

Re: How ot call a canvas froma form? [message #427084 is a reply to message #427075] Wed, 21 October 2009 00:49 Go to previous messageGo to next message
beginnerHere
Messages: 55
Registered: October 2009
Member
are you using one block and two canvases or two blocks and two canvases?

if your second canvas is in another block then you could use post_update trigger for that block to place a call to the first block... hope it works!

if there is one block and two canvases then my whole logic is out of the park... according to what little i know, one block and two CONTENT canvases is not right... if we make two content canvases then we must make use of two blocks... we can use two BLOCKS in one CONTENT CANVAS but NOT two CONTENT CANVASES in one BLOCK... at least thats what i know... maybe i'm wrong...

i THINK (not TOO sure) if you are using the two canvases in one block then the second canvas must be either a stacked canvas or a tab canvas, not content canvas...

[Updated on: Wed, 21 October 2009 00:54]

Report message to a moderator

Re: How ot call a canvas froma form? [message #427090 is a reply to message #427084] Wed, 21 October 2009 01:25 Go to previous messageGo to next message
monikabhakuni
Messages: 110
Registered: September 2008
Location: India
Senior Member
Hi Begginerhere,

I am using two blcok and two cavnas.
Actually i m customizing an existing apps form the issue was that here some libraries were attachedand in one of the standard procuedure APP_WINDOW.CLOSE_FIRST_WINDOW they are closing the window.
So i need to give some code here. as per my understanind.

Can you giude me with this package if possible for you.

Thansk in Advance.
Monika

Report message to a moderator

Re: How ot call a canvas froma form? [message #427141 is a reply to message #427090] Wed, 21 October 2009 05:35 Go to previous messageGo to next message
beginnerHere
Messages: 55
Registered: October 2009
Member
hey Monika,

i found this for APP_WINDOW.CLOSE_FIRST_WINDOW:

The window close events for all non-modal windows (but no modal windows) get passed to APP_CUSTOM.CLOSE_WINDOW. The default code provided in the TEMPLATE form does the following:

--If the form is in enter-query mode, APP_CUSTOM calls
APP_EXCEPTION.DISABLED

--Otherwise, if the cursor is currently in the window to be closed, APP_CUSTOM issues a do_key('PREVIOUS_BLOCK') to attempt to move the cursor out of the current window

--Finally, APP_CUSTOM hides the window with a call to HIDE_WINDOW('<window_name>').

You need to modify this procedure to account for any other behaviors you require. Specifically, modify it to handle block coordination issues and detail windows.

Remember that you must move the cursor out of the window before closing it, otherwise the window reopens automatically.

To close the first window of a form, which is equivalent to "File->Close Form" call APP_WINDOW.CLOSE_FIRST_WINDOW.

(have a looksee at "http://sbllc3.solutionbeacon.net/pls/a159vis2/fndgfm/fnd_help.get/US@PSA_US/fnd/@o_cwb")

Monika, if you are not using this APP_WINDOW trigger for anything then i think it is best you remove it... judging by what you've told till now, i don't think that you need this... i can be done without it... if you still are not sure about this and want to look further into it then i'll try looking more deeply into this...

Report message to a moderator

Re: How ot call a canvas froma form? [message #427142 is a reply to message #427141] Wed, 21 October 2009 05:39 Go to previous messageGo to next message
monikabhakuni
Messages: 110
Registered: September 2008
Location: India
Senior Member
Hi Beginnerhere,

this is the code that i think we are using. So can you tell me whr am i going wrong.
procedure close_window(wnd in varchar2, children_only in boolean default FALSE) is
begin


if (name_in('system.mode') = 'ENTER-QUERY') then
app_exception.disabled;
return;
end if;

if (children_only = FALSE) then

if (wnd = 'EVENT_WIN' ) then
app_window.close_first_window;
/* From here modidfied by Monika */
elsif wnd = 'INDUCTION' then
app_custom.close_window('INDUCTION');
IF (wnd = GET_VIEW_PROPERTY(GET_ITEM_PROPERTY(
:SYSTEM.CURSOR_ITEM, ITEM_CANVAS),
WINDOW_NAME)) THEN
DO_KEY('PREVIOUS_BLOCK');
END IF;
/*till here code added */
else
hide_window(wnd);
end if;
end if;

end close_window;

The issue is that window is getting hanged. Here INDUCTION is hte custom window.

Thanks in Advance.
Monika

Report message to a moderator

Re: How ot call a canvas froma form? [message #427155 is a reply to message #427142] Wed, 21 October 2009 06:21 Go to previous messageGo to next message
beginnerHere
Messages: 55
Registered: October 2009
Member
hey Monika,

hmm...

try changing this:-

DO_KEY('PREVIOUS_BLOCK');

to:-

go_block('BLOCK_NAME');

--where BLOCK_NAME is the name of your block

i'll also try to make a form according to your specification and try your code in it, i hope i'll get to know what is going wrong...

[Updated on: Wed, 21 October 2009 06:30]

Report message to a moderator

Re: How ot call a canvas froma form? [message #427174 is a reply to message #427155] Wed, 21 October 2009 07:14 Go to previous messageGo to next message
monikabhakuni
Messages: 110
Registered: September 2008
Location: India
Senior Member
Hi Beginnerhere,

after doing those changes also i am having the same issue. The whole application is getting hanged.

Don't know whr i am going wrong.
If you come across something else then pls let me know.

Thanks in Advance.
Monika

Report message to a moderator

Re: How ot call a canvas froma form? [message #427489 is a reply to message #427174] Thu, 22 October 2009 22:13 Go to previous messageGo to next message
beginnerHere
Messages: 55
Registered: October 2009
Member
hey Monika,

i tried but i couldn't figure out why the application is getting hanged. sorry Sad ... i would suggest you to rebuild the thing, one little thing at a time...

another idea would be to place alerts within the code and see EXACTLY where is the thing is going wrong... place dummy alerts and see till where do these alerts get fired... till the point where they keep firing, the code is correct, see which alert does not fire... means that statement between the fired and unfired alert is screwing up something...

hope it helps...!

[Updated on: Thu, 22 October 2009 22:16]

Report message to a moderator

Re: How ot call a canvas froma form? [message #427502 is a reply to message #427489] Thu, 22 October 2009 23:50 Go to previous messageGo to next message
monikabhakuni
Messages: 110
Registered: September 2008
Location: India
Senior Member
Hi,

I have figured out the problem.
app_custom.close_window('INDUCTION');

is the main problem as this command closes the parent window so the instance was getting hanged.
so the instead of this i am using hide_window(wnd);
And now it is working fine.
Do you know how to register custom table in apps.
If you know then please let me know the steps.
It would be really helpful to me.

Thanks in Advance.
Monika

Report message to a moderator

Re: How ot call a canvas froma form? [message #427523 is a reply to message #427502] Fri, 23 October 2009 01:28 Go to previous messageGo to next message
beginnerHere
Messages: 55
Registered: October 2009
Member
Razz

okeee for registering, use the table registration API..ie ad_dd package:
--ad_dd.register_table()
--ad_dd.register_column()
to register the table to apps

have a looksee at this :

"http://www.sap-img.com/oracle-database/script-to-register-and-unregister-custom-tables-and-columns.htm"

tell me if it helps or not, cause this is new to me too!

[Updated on: Fri, 23 October 2009 01:34]

Report message to a moderator

Re: How ot call a canvas froma form? [message #427532 is a reply to message #427523] Fri, 23 October 2009 02:06 Go to previous messageGo to next message
monikabhakuni
Messages: 110
Registered: September 2008
Location: India
Senior Member
Hi Beginnerhere,

Thanks a lot for your help. I will try it.
One more thing do you have any idea how to set value from an item of one block to the item of another block in the same form.

See my requirement is that
for HR Module there is a screen Evnets And Bookings here i have events and bookings details to be held or which have already took place in an organization so for each booking we are to develop some form for rating thing.
Noa i have developed a canvas to do that and on the click of a button i m going to that canvas.
But i hasd to link both t he canvas so i was trying to use booking_id.
In Events and bookings canvas and in bookings data block we have value for booking_id
so i need to pass this value to induction canvas to that i ca link botht eh block but dont know how to do that.

Using hte trigger WHEN BUTTON PRESSED i gave the code to set teh value for booking id but it is not wokring.
My code was

set :INDUCTION_DETAIL.BOOKING_ID= :BOOKINGS.BOOKING_ID;

so during compilation i am getting error meggase as
Bad Bind Variable INDUCTION_DETAIL.BOOKING_ID.

So how to proceed with that or can i go with some other approach also
please suggetst me.

Thanks in Advance.
Monika

Report message to a moderator

Re: How ot call a canvas froma form? [message #427573 is a reply to message #427532] Fri, 23 October 2009 05:16 Go to previous messageGo to next message
beginnerHere
Messages: 55
Registered: October 2009
Member
hey Monika,

i think it should work the way you are doing it... try removing the "set" keyword and doing it like

- :INDUCTION_DETAIL.BOOKING_ID := BOOKINGS.BOOKING_ID;

i'm looking into it now, but i would say another easy way for doing this would be,
-behind the button do this:
-place a text_item OUT OF THE FRAME AREA of the canvas,
-pass the :BOOKINGS.BOOKING_ID as simple booking_id to that text_item - (:BOOKING_ID := :TEXT_ITEM;)
-now on the second induction canvas where you want to use the value and get the value from the text_item and put it in your item(booking_id) - (:YOUR_ITEM := :TEXT_ITEM;)
-use post_block trigger or when_new_block_instance trigger to get it done...

another way would be to make use of a program unit and passing the value from the first canvas to a variable in the program unit and then making use of it there... but to me this is over-kill...

i'll also try to figure out how to do it the way you are doing it...

[Updated on: Fri, 23 October 2009 05:23]

Report message to a moderator

Re: How ot call a canvas froma form? [message #427576 is a reply to message #427573] Fri, 23 October 2009 05:48 Go to previous messageGo to next message
monikabhakuni
Messages: 110
Registered: September 2008
Location: India
Senior Member
Hi,

I have tried with
:INDUCTION_DETAIL.BOOKING_ID := BOOKINGS.BOOKING_ID;
So this time it is giving me error as
FRM-30015: Ambiguous item name BOOKING_ID.
Block: INDUCTION_DETAIL
Form: PERWSGEB
FRM-30085: Unable to adjust form for output.

So how to resolve this issue any idea about it.

Thanks in Advance.
Monika

Report message to a moderator

Re: How ot call a canvas froma form? [message #427580 is a reply to message #427576] Fri, 23 October 2009 06:01 Go to previous messageGo to next message
beginnerHere
Messages: 55
Registered: October 2009
Member
FRM-30015: Ambiguous item name BOOKING_ID

basically it is saying what we are seeing ourselves, that the booking_id is being repeated and it is having two different meanings... your logic is correct now, but the compiler is scratching its head because of same item names... do you have to have the same name, doesn't it function if you change the BOOKINGS block's booking_id to 'booking_id1' or something?

Report message to a moderator

Re: How ot call a canvas froma form? [message #427581 is a reply to message #427573] Fri, 23 October 2009 06:04 Go to previous messageGo to next message
monikabhakuni
Messages: 110
Registered: September 2008
Location: India
Senior Member
Hi,

I have tried with
:INDUCTION_DETAIL.BOOKING_ID := BOOKINGS.BOOKING_ID;
So this time it is giving me error as
FRM-30015: Ambiguous item name BOOKING_ID.
Block: INDUCTION_DETAIL
Form: PERWSGEB
FRM-30085: Unable to adjust form for output.

So how to resolve this issue any idea about it.

Thanks in Advance.
Monika

Report message to a moderator

Re: How ot call a canvas froma form? [message #427582 is a reply to message #427581] Fri, 23 October 2009 06:06 Go to previous messageGo to next message
monikabhakuni
Messages: 110
Registered: September 2008
Location: India
Senior Member
Hi,

Ok yeah i will try with that hope it works this time.
Will update about its progress. Smile

Best Rgeards,
Monika

Report message to a moderator

Re: How ot call a canvas froma form? [message #427583 is a reply to message #427582] Fri, 23 October 2009 06:10 Go to previous messageGo to next message
beginnerHere
Messages: 55
Registered: October 2009
Member
hey,

yeah hopefully it'll work..

Report message to a moderator

Re: How ot call a canvas froma form? [message #427590 is a reply to message #427583] Fri, 23 October 2009 07:20 Go to previous messageGo to previous message
monikabhakuni
Messages: 110
Registered: September 2008
Location: India
Senior Member
Hi Its done now Smile

Report message to a moderator

Previous Topic: Conversition of forms4.5i to 6i
Next Topic: how to check all customer numbers by checking select all check box in forms
Goto Forum:
  

[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Tue Feb 04 03:57:53 CST 2025
.:: Forum Home :: Blogger Home :: Wiki Home :: Contact :: Privacy ::.